0086-571-88220973 / 88220971 hzpt@hzpt.com
0 Item

Gearbox Plastik Mini Geared Motor TGP01S-A130

Gearbox Plastik Mini Geared Motor TGP01S-A130

  • TGP plastic gears gearbox plus A130 permanent magnet DC motor
  • small size dc gear motor with low speed and big torque
  • suitable to small diameter, low noise, and big torque application
  • reduction ratio: 48,120,180,220,288
Kategori:
Dapatkan Penawaran yang

Gearbox Plastik Mini Geared Motor TGP01S-A130Gearbox Plastik Mini Geared Motor TGP01S-A130

  • TGP plastic gears gearbox plus A130 permanent magnet DC motor
  • small size dc gear motor with low speed and big torque
  • suitable to small diameter, low noise, and big torque application
  • reduction ratio: 48,120,180,220,288

Characters of Mini Geared Motor

  • Motor dc gear ukuran kecil dengan kecepatan rendah dan torsi besar
  • Cocok untuk diameter kecil. Kebisingan rendah dan aplikasi torsi besar
  • Reduction ratio: 48、120、180、220、288
  • poros tunggal. Ukuran kecil 18.7mm * 22.3mm * 64.5mm
  • Motor roda gigi plastik DC dengan kecepatan rendah dan torsi besar

Dimensi motor roda gigi (mm)

Application: Robot, Toys, Remote Control Toy cars, etc.

Mini Geared MotorTechnical Data

Model motor No Nilai tegangan
VDC
Tidak ada kecepatan beban
r / min
Arus tanpa beban
mA
Menghentikan torsi
g.cm
Kios saat ini
A
TFE-130RA-12215 6.0 11500 120 20 0.85
TFE-130RA-14175 3.0 8000 120 13 0.70
TFE-130RA-18100 3.0 11500 250 20 1.80

Data Teknis Gear Motor:

Gearbox with motor:TGP01S-A130-12215-XXX
Reduction ratio: 48  120  180  220  288
Kecepatan tanpa beban rpm: 230 90 60 50 38
Maks. torsi toleransi sesaat kg.cm: 0.7 1.4 2.0 ​​2.2 2.8

Gearbox dengan motor

TGP01S-A130-14175-XXX
Reduction ratio: 48  120  180  220  288
Kecepatan tanpa beban rpm: 150 60 40 33 25
Maks. torsi toleransi sesaat kg.cm: 0.5 0.9 1.2 ​​1.4 1.8

TGP01S-A130-18100-XXX
Reduction ratio: 48  120  180  220  288
Kecepatan tanpa beban rpm: 230 90 60 50 38
Maks. torsi toleransi sesaat kg.cm: 0.7 1.4 2.0 ​​2.2 2.8

Other Plasstic gearbox plus A130 DC motor

TGP01D-A130 TGP01S-A130

TGP01D-A130

TGP01S-A130

TGP02D-A130 TGP02S-A130

TGP02D-A130

TGP02S-A130

Apa itu Motor DC?

A Direct Current (DC) motor is a rotating electrical device that converts direct current, of electrical energy, into mechanical energy. An Inductor (coil) inside the DC motor produces a magnetic field that creates rotary motion as DC voltage is applied to its terminal. Inside the motor is an iron shaft, wrapped in a coil of wire. This shaft contains two fixed, North and South, magnets on both sides which causes both a repulsive and attractive force, in turn, producing torque. ISL Products designs and manufactures both brushed DC motors and brushless DC motors.  We tailor our DC motor's size and performance to meet your desired specs.

Mini Geared Motor selection process

Need help determining the motor suitable for your application? Check our motor selection guide or visit the ISL motor database.
In the conceptual design stage, the motor selection process may be challenging, but our engineers will help. We provide concierge services for all DC motor and gear motor projects. Our team of engineers works with you to provide the best component solutions. The following points can help you determine and select the most suitable motor or gear motor for our application.

Mini Geared Motor
▎Design requirements – the design evaluation stage of studying product development requirements, design parameters, equipment functions, and product optimization.

▎Design calculations – calculations used to determine which motor is best suited for your application. The design calculation determines the transmission ratio, torque, rotating mass, service factor, suspension load, and test analysis.

▎Type of DC motor/gear motor - the most common motor converts electrical energy into mechanical energy. These types of motors are powered by direct current (DC).

▎Motor Specifications – Once the design calculations are performed, and the application parameters are defined, you can use this data to determine which motor or gear motor will best fit your application. Some of the most common specs to consider when selecting a motor or gear motor would be:

    • Tegangan
    • Arus
    • Daya
    • Tenaga putaran
    • RPM
    • Harapan Hidup / Siklus Tugas
    • Rotasi (CW atau CCW)
    • Diameter dan Panjang Poros
    • Batasan Enklosur
industri yang kami layani

Kami berjanji akan menawarkan harga terbaik dengan kualitas tinggi di Cina! Kami juga menerima pesanan khusus tentang produk. Jika Anda tertarik dengan produk kami. Harap jangan ragu untuk memberi tahu kami. Kami dengan senang hati memberi Anda informasi rinci.Kami berjanji bahwa produk kami akan aman dan berkualitas tinggi dan harga yang wajar. Jika Anda tertarik dengan produk kami, silakan hubungi kami secepat mungkin. Kami dengan tulus mencari kerja sama Anda.

Sebagian besar produk kami diekspor ke Eropa atau Amerika, baik produk standar maupun nonstandar tersedia. Kami dapat memproduksi sesuai gambar atau sampel Anda. Bahan bisa standar atau sesuai permintaan khusus Anda. Jika Anda memilih kami, Anda memilih dapat diandalkan.

spanduk hzpt oem odm

laporan kualitas pruduct

Pengobatan permukaan

Anil, kanonisasi alami, perlakuan panas, pemolesan, pelapisan nikel, pelapisan krom, pelapisan seng, passivisasi kuning, passivisasi emas, satin, permukaan hitam dicat dll.bahan produk tersedia

Metode pemrosesan

Mesin CNC, pukulan, pembubutan, penggilingan, pengeboran, penggilingan, broaching, pengelasan dan perakitan

produk finishing

 

paket produk